Global SPX

Global Website

Americas

Asia - Pacific

Europe

Power Team

Global - English

Asia - Pacific

Europe

HT: 50-200GPM Tester

  • Specialty Tools: HT200

    Specialty_Tools_HT200

  • Specialty Tools: HT50A

    Specialty_Tools_HT50A

Image 1of 2
  • Specialty Tools: HT200
  • Specialty Tools: HT50A
Product Type:

Hydraulic Testers

Hydraulic Testers accurately measure oil flow, pressure and temperature on in-plant equipment, forklifts, machine tools and more.
 
Find a location near you:
Search
75 AND 200 GPM IN-LINE HYDRAULIC TESTERS
  • Accurately measure oil flow, pressure and temperature on in-plant equipment, forklifts,machine tools and more.
  • Temperature and flow readings are in Metric and English, accurate to within ±2% of full scale.
  • Dual pressure gauges for high and low pressure readings; low pressure gauge is automatically shut off and protected as pressure rises beyond its maximum reading.
  • Automatic pressure compensating feature lets you increase flow without affecting pressure setting.
  • Reverse flow through tester will not cause damage; replaceable safety disc ruptures if pressure exceeds upper limit.
  • Solid state voltage regulator eliminates errors caused by voltage change during testing.

50 GPM IN-LINE HYDRAULIC TESTERS
  • Troubleshoots systems with capacities to 200 gpm at pressures less than 5,000 psi. Accurately measure oil flow to ±5%, pressure to within 2% and temperature readings within 1%.
  • Pressure gauge is liquid filled to dampen system pulsation.

For more precise low pressure readings, an optional dual pressure gauge kit is available.

Order No.DescriptionWeight
(lbs.)
HT50AHydraulic circuit tester with single liquid filled pressure gauge, 0-5,000 psi, 0-354 bar. Includes two adapter unions for 3/4" male NPTF fittings.37.0


Testing the Pump: Operator runs engine at a specific rpm and adjusts tester's pressure compensating valve to simulate a work load. By com paring meter readings with manufacturer specs, proper operation of pump can be confirmed. If oil flow and pressure do not meet Specs, the pump is faulty, Or, if test results and specifications agree, the operator will know that the problem is elsewhere in the system and that the other tests must be performed. Regardless of the component being tested, Hook-up and testing is accomplished in minutes.

Note: These hydraulic testers should always be used with the owner's manual/manufacture's specification for the system under the test.

Order No.Max Flow
(gpm)
ScaleFlow
Ranges
(gpm)
L/min.Max. Oper. PressureTemp. Scale
Range
Port SizesWeight
psiBAR°F°C(lbs.)(kg.)
HT50A500-500-2005,00034520-240-6 to 11411/16-12UN Female "O" Ring with Union Adapt. 3/4 " Female NPTF30.316.8
HT7575High Low15-75
3-15
50-300
10-60
5,000345100-25040-1203/4 " NPT Swivel18.28.6
HT200200High Low25-200
5-40
100-750
20-150
5,000345100-25040-12011/2 "* SAE Split Flange28.213.6
* Not included, must be ordered separately.
Specialty Tools: HT Series - Diagram
Order No.ABC
(in.)(mm.)(in.)(mm.)(in.)(mm.)
HT50A12 1/4311.006 1/4159.0010255.00
HT7513 3/4349.5011 7/8301.625 3/4146.05
HT20015 7/8403.4713 3/4336.556 3/4171.45

Testing a pump

Specialty Tools: HT Series - Diagram 1 - Testing a pump


Testing a relief valve

Specialty Tools: HT Series - Diagram 2 - Testing a relief valve


Testing a directional valve

Specialty Tools: HT Series - Diagram 3 - Testing a directional valve